Guide 04 · Packaging & Formula Compatibility
Airless Pumps vs. Glass Droppers vs. Tubes: Matching Formats to Active Formulas
Prevent oxidation and leakage by pairing viscosity and active ingredients with the right dispensing system.
Select packaging from the measured formula behavior, dose and user routine. Airless, glass and tube formats each have limitations; no material or dispenser alone guarantees oxygen protection, compatibility or leak-free transport. Approve the final formula–component combination with a documented test plan.
Decision parameters
Swipe or scroll horizontally to compare every column.
| Format | Formula / Viscosity Direction | Main Decision Driver | Approval Tests |
|---|---|---|---|
| Airless pump | Compatible fluid-to-cream systems within the dispenser specification | Controlled dose and product evacuation; validate oxygen/light protection rather than assuming it | Priming, dose repeatability, evacuation, piston/seal compatibility, leakage and stability |
| Glass dropper | Pumpable low-viscosity serums or oils compatible with the full dropper assembly | Precise handling and presentation; review light, headspace and repeated opening exposure | Pipette pickup, dose consistency, bulb/wiper compatibility, seal integrity and active stability |
| Tube | Gels, creams and higher-viscosity systems that match the orifice and laminate | Squeezability, travel use and fill process; select barrier properties for the actual formula | Seal/closure integrity, stress cracking, decoration resistance, leakage and dispensing |
| Pump bottle | Cleansers, lotions and suitable rinse-off or leave-on emulsions | Flow rate, dose, dip-tube fit and viscosity limits | Pump output, actuator performance, lock function, compatibility and transport leakage |
Compare the complete filled-pack system. No universal viscosity range or packaging format guarantees compatibility; validate with the component supplier specification and final formula.
Procurement & compliance checklist
- Specify viscosity with measurement method and temperature, plus target dose and evacuation performance.
- Review all contact materials: bottle, liner, piston, dip tube, gasket, spring and decoration.
- Run formula–packaging stability and compatibility checks; confirm active retention or light protection where relevant.
- Agree leakage, closure, orientation and transport tests on the final filled pack.
- Approve component drawings, batch traceability and retained samples before scaling.
Related reference: existing buyer guide.
Buyer questions, answered
What is the starting MOQ for a private label project?
Around 1,000 units is a planning starting point for suitable stock-packaging projects. The confirmed MOQ depends on formula, fill size, decoration and component availability, and is stated in the quotation.
How long does production typically take?
Use 15–45 days as a route-planning range after formula, artwork, components and commercial terms are approved. The guide compares 15–25, 25–35 and 35–45 day tiers; tooling, testing, registration, freight and customs can add time.
Which ISO 22716 certificate is available for review?
The existing Yuanze quality-control page lists an Intertek ISO 22716:2007 manufacturing-management certificate, HBPCER20260291, valid through 15 June 2029. Review the certificate scope and current issuer record before procurement approval; this is not a product approval.
Can Yuanze support FDA, CPNP, CPSR, BPOM and HALAL documentation?
Yuanze can coordinate factory and confirmed product documents for the selected route. FDA/MoCRA registration, EU CPNP notification, CPSR safety assessment, BPOM notification and HALAL certification have different roles and scopes. Confirm current records, testing and local Responsible Person/importer duties per project; Great Britain uses SCPN.